Carved for you, to outlive us all.

Thuringia (Thüringen)

Baroque Woodcarver Serving Thuringia (Thüringen)

Scroll

You found this page while looking for a carver in Thuringia (Thüringen). My name is Alexander Grabovetskiy, and I am a wood carver. I would be glad to carve something for a home in your part of the world, whether it is one small rosette or a whole paneled room.

Alexander Grabovetskiy carves lions

At sixteen I became the only apprentice of a fine-art carver in Russia. He didn't care much about pretty drawings. He made me learn how rhythm and repetition hold a design together, and how each tool wants to move through the wood. "Think like a tool," he said, and more than thirty years later I still hear him every time I sharpen a gouge.

How the work is done

Some carvings stay in pale wood, and some get gold. A gilded frame catches the light of the whole room, while bare limewood looks warm and soft, almost like skin, and each one is right in the right place. The room decides.

Before I cut anything, I study. For a Baroque frame I go back to how Baroque carvers really built their leaves, how deep they went and where they stopped. For a garland in the manner of Grinling Gibbons, I go back to Gibbons himself. Here a commission is a study first and a carving second.

Alexander Grabovetskiy is Carving custom Woodcarving

You can see finished work in the heritage collections, and there is a lot more of it there than fits on one page. The pipe organ shades were carved for a concert organ in 2025, with the acanthus cut right through the board so the instrument can breathe. The lion masks are each cut from a single block.

In 2015 Popular Woodworking gave my carving an Editors' Choice award. That came three years after the Woodworkers Institute named me International Woodcarver of the Year.

Alexander Grabovetskiy Custom Wood Carving

If you have a room in Thuringia (Thüringen) that needs real carving, write to me and send a few photos with the sizes. We will start with the study. Shall we carve?

In Motion

In the studio

The Commission

From first sketch to installed carving.

Every commission, for Thuringia (Thüringen) or anywhere else in the world, goes the same way, from the first conversation to the finished piece set in its place.

  1. 01

    We talk it through

    It starts with a conversation about your drawings, your photos or just a rough idea, and about the room where the piece will live.

  2. 02

    Drawing & estimate

    I draw the ornament to scale and send a clear estimate and timeline. Nothing is carved until we agree on the design and the price.

  3. 03

    The carving

    The carving itself takes the longest. Weeks for a small piece, months for a big one.

  4. 04

    Crated & delivered

    The finished carving is sealed, crated and shipped ready to install. When it has to join older work, it is matched to the millwork that is already there.

Why Alexander

A standard set over forty years.

I carve for Thuringia (Thüringen) architects, designers and churches, and my work stands in private homes and museums around the world.

Forty years at the bench

Four decades of architectural and ornamental commissions for clients worldwide.

Woodcarver of the Year

Named International Woodcarver of the Year in 2012 by the Woodworkers Institute.

40+
Years carving
2012
Woodcarver of the Year
Worldwide
Private estates & museums
One of the best wood carvers in the world.
NewsCenter Maine (NBC), 2021
Frequently Asked

Baroque Woodcarver in Thuringia (Thüringen)

Do you take baroque woodcarver commissions in Thuringia (Thüringen)?+

Yes. I carve architectural and ornamental work for clients in Thuringia (Thüringen) and around the world, crated and shipped ready to install. Most commissions begin with a short talk about your project, plus drawings or a few reference photos.

What kinds of wood carving do you make?+

Baroque and Rococo ornament, architectural carving (capitals, corbels, friezes, mantels, panels and doors), pipe organ cases and shades, foliage in the manner of Grinling Gibbons, figural reliefs, mirror and picture frames, and carving for custom furniture.

How long does a commissioned carving take?+

It depends on the size and the detail. A single ornament can take a couple of weeks, and a full architectural scheme can take several months. You get a clear timeline with the estimate, before any work begins.

Can you match an existing carving or a historical style?+

Yes. I often reproduce or extend historical work and match the millwork that is already there, so the new piece sits beside the old one in the right period, with the right profile and finish.

Do you work with architects and interior designers?+

All the time. I work from drawings and CAD, send samples, and carve to spec for homes, churches and commercial projects in Thuringia (Thüringen) and beyond.

Grinling-Gibbons Style

Foliage and lace, cut from a single block.

The same hand that carves for Thuringia (Thüringen) carves for private estates and museums worldwide.

The Practice

The work as historical study

Every commission I take starts as a research project, and only then becomes an order. Before anything is carved, I study the piece. I trace the motif back to its period and to the carvers who made it famous, like Grinling Gibbons in England, and I try to understand how their hands thought and moved. That way a skill that is slowly disappearing gets carried into one more new piece, the way carvers have worked for centuries.

That is why every carving from my shop is the only one of its kind. It is my reading of a historical style, never a copy taken from a pattern, and the grain, the line of each leaf and the depth of every undercut come out of that study. No two pieces come out the same. I don't make mass-produced objects. What you receive is a finished carving with the research, the design and a whole life of work behind it, and a small piece of an old art that did not get lost.

Every commission starts with a conversation.

Tell me about your project: a single ornament or a full architectural scheme.

Discuss Your Vision